Safety or driver-assistance features are no substitute for the driver’s responsibility to operate the vehicle in a safe manner. The driver should remain attentive to traffic, surroundings and road conditions at all times. Visibility, weather and road conditions may affect feature performance. Read the vehicle Owner’s Manual for more important feature limitations and information.
At speeds above 25 mph, IntelliBeam can automatically turn the vehicle’s high beam headlamps On and Off according to surrounding traffic conditions.
Uses a camera to provide a wide and less obstructed view behind the vehicle while you’re driving. You can switch between the camera view and a traditional rearview mirror.
Can provide side-mirror visual alerts when moving vehicle is detected either quickly approaching or already in your side blind zone. Can help you avoid lane change collisions.
Can warn you of detected left or right cross traffic behind your vehicle when you’re in Reverse.
Can warn you if it detects a potential front-end collision with a vehicle you’re following, so you can take action. It can also provide a tailgating alert if you’re following a vehicle much too closely.
Uses a brief, steering wheel turn to alert you when you may be unintentionally drifting out of detected lane lines, so you can steer to stay safely in your lane. If needed, you may receive additional Lane Departure Warning alerts. System alerts do not occur if you’re using your turn signal or it detects you may be intentionally leaving your lane.
Following Distance Indicator displays the gap time in seconds between your vehicle and a detected vehicle you’re following. This can help you decide if you’re following much too closely.