1. Adjust your driver’s seat, power outside mirrors, power steering column and adjustable brake and throttle pedals (if equipped) to your desired positions
2. Press and hold the “SET” button and button “1” simultaneously on the driver’s door until a beep sounds; or, press and release the “SET” button and then immediately press and hold button “1” until a beep sounds
3. Repeat steps one and two using button “2” to set the memory positions for a second driver

If programmed “ON – Driver Door Open,” positions are recalled when:

• You press the “UNLOCK” button on the remote keyless transmitter and the driver’s door is open
• You press the button on the driver’s outside door handle and the driver’s door is open (Keyless Access vehicles only)

If programmed “ON – At Ignition On,” positions are recalled when the ignition is turned on.

With the vehicle on and in Park, press and hold button “1,” “2” or “EXIT” to recall stored settings.

Releasing the button before a stored position is reached stops the recall feature.

1. Adjust the driver’s seat, power outside mirrors, power steering column (if equipped), and adjustable brake and throttle pedals to your desired exiting positions
   
2. Press and hold the “SET” button and the “EXIT” button on the driver’s door until a beep sounds