1. Adjust your driver's seat, power outside mirrors, power steering column and adjustable brake and throttle pedals to your desired positions
2. Press and release the “SET” button; a beep will sound
3. Immediately press and hold button “1” until two beeps sound
4. Repeat steps one, two and three to set button “2” for a second driver

If programmed ON in Vehicle Personalization, the stored positions are recalled when the ignition is changed from “off” to “on/run” or “Acc/Accessory.” The shift lever must be in P (Park) to start Auto Memory Recall.

Press and hold “1,” “2” or “EXIT” to manually recall the previously stored memory position.  Releasing “1,” “2” or “EXIT” before the stored positions are reached will stop the recall.

1. Adjust the driver’s seat, power outside mirrors, power steering column, and adjustable brake and throttle pedals to your desired exiting positions
2. Press and release the “SET” button, a beep will sound
3. Immediately press and hold the “EXIT” button until two beeps sound

Automatically recalls to previously stored positions when one of the following occurs:
1.    The vehicle is turned off and the driver’s door is opened within a short time
2.    The vehicle is turned off with the driver’s door open