With ignition on or in Accessory mode:

1. Adjust your driver seat, power-adjustable outside mirrors and power steering column (if equipped) to your desired positions.
2. Press and release the “SET” button; a beep will sound.
3. Immediately press and hold button “1” until two beeps sound.
4. Repeat steps one through three using button “2” or “EXIT” to set the memory positions for a second driver or for optimum exit position.
   

Entering vehicle:

1. The stored driver 1 or 2 positions can be automatically recalled when the ignition is changed from "OFF" to "ON/RUN" or "ACC/ACCESSORY" by turning the function ON in the vehicle Settings menu.
2. To do so, on the center display, go to Settings  Vehicle  Seating Positions and select Seat Entry Memory "ON".

1. The stored driver EXIT position can be automatically recalled when the vehicle is turned off and the driver door is opened or when the vehicle is turned off when the drive door is already opened by turning the function ON in the vehicle Settings menu.
2. To do so, on the center display go to Settings  Vehicle  Seating Positions and select Seat Exit Memory "ON".
   

With the vehicle on and in Park, press and hold button “1,” “2” or “EXIT” to recall stored settings. Releasing the button before a stored position is reached stops the recall feature.