HOW TO USE AUTOMATIC PARKING ASSIST WITH BRAKING

1. Automatic Parking Assist with Braking, if equipped, uses ultrasonic sensors at the front, rear and sides to detect a parking spot.
2. The system figures out where it can park by detecting vehicles around it. If there are no vehicles nearby, the system won't work.
3. Once it detects a parking space, the system then automatically steers your vehicle into the space while moving at idle speed and braking as needed. While the system steers, you'll take your hands off the steering wheel and select FORWARD or REVERSE gears as prompted.
4. While the feature is active, you must:

a. Always be prepared to override the feature by steering

b. Always be prepared to apply harder braking as needed during the maneuver

1. When the system has detected a parking space, you’ll hear a beep and see a message on the center display asking you to confirm you want to park.
   
         a. Your vehicle will shift to REVERSE automatically when you confirm.
   
   
2. Your steering wheel may shake to indicate you can remove your hands from the wheel.
3. During automatic parking, the vehicle will move at idle speed (maximum speed of 3 mph) and steer and brake into the detected space.
4. Continue watching the driver display or center display for step-by-step instructions on when to brake, shift gears and remove your hands from the steering wheel. You’ll hear beeps as new instructions appear.
5. You’ll see a progress bar display the status of the parking maneuver.
6. In small or tight spaces, it may take multiple maneuvers to park your vehicle.
7. Automatic Parking Assist will beep and display a “Parking Complete” message when it’s done. When you see this, hold the brake pedal and place the vehicle in PARK.

1. If you want to cancel the maneuver, either press the Automatic Parking Assist button or take control of the steering wheel. 

• Remember, Automatic Parking Assist with Braking does not respond to changes in the parking space, such as the movement of a nearby vehicle or a person or object entering the parking space. Automatic Parking Assist with Braking does not detect or avoid traffic that is behind or next to your vehicle. Always be prepared to stop the vehicle during parking maneuvers.
• Always be prepared to shift gears or accelerate as needed.
• The feature will remain active if you press the brake pedal, unless the brake pedal is pressed and held for an extended period of time.
  
• You'll still receive Park Assist alerts and Safety Alert Seat pulses (if your vehicle is equipped with Safety Alert Seat) during the Automatic Parking Assist maneuver to keep you aware of detected objects around your vehicle.
• Keep the Automatic Parking Assist sensors clean to ensure the system works effectively. There are 12 sensors located on the front and rear bumpers. For more information on the system’s sensors, see the Automatic Parking Assist Troubleshooting article.

Safety or driver assistance features are no substitute for the driver’s responsibility to operate the vehicle in a safe manner. The driver should remain attentive to traffic, surroundings and road conditions at all times. Visibility, weather, and road conditions may affect feature performance. Read the vehicle Owner’s Manual for more important feature limitations and information.