HOW AIR RIDE ADAPTIVE SUSPENSION WORKS
Available Air Ride Adaptive Suspension incorporates air springs that allow you to raise and lower the height of the vehicle to suit different driving conditions.
HOW TO RAISE AND LOWER YOUR VEHICLE WITH AIR RIDE ADAPTIVE SUSPENSION (IF EQUIPPED)
1. First, locate the Ride Height Controls in your vehicle.
a. Some models will have a selector knob and a button, while others will have separate buttons for raising and lowering the vehicle. Refer to your vehicle’s Owner’s Manual for button locations if you’re unable to find them.
2. To use the Ride Height Controls:
a. On models with a selector knob, press the button on the knob to open the Ride Height menu in your Driver Information Center (DIC). Turn the knob to the right or left to highlight a ride height, and press the button to select it.
b. If your vehicle has separate buttons for raising or lowering the vehicle, press either of those buttons to open the menu, then use them to select the desired ride height.
Note: The Ride Height menu will time out after allowing a certain amount of time to make your selection.
3. Depending on your vehicle, you can select the following available ride heights:
a. Entry/Exit Height: Lowers your vehicle to make it easier to get in and out of.
b. Normal Height
c. Increased Ground Clearance: Higher than Normal Height. On most vehicles, if you select Off-Road or Terrain Mode using the Driver Mode Selector, your vehicle will automatically raise to this height.
d. Maximum Ground Clearance: Raises higher than Normal Height (full-size SUVs only).
i. Certain models can enable maximum ground clearance with 4LOW Mode active.
e. Lowered Ground Clearance:
i. Available on select models, this height lowers the vehicle for better handling and performance. When selected, the vehicle will maintain this height at all speeds.
ii. For some models, this height is automatically enabled when V-Mode or Sport Mode is enabled.
iii. Some models will also lower to this height if you select the Sport suspension setting in My Mode.
Automatic Entry and Exit
- Your vehicle can automatically lower when you place it in PARK to make it easier to get in and out.
- To enable this, go to your vehicle Settings menu on your infotainment screen and enable “Easy Exit.”
- This feature is disabled when you raise your vehicle above Normal Height, when your vehicle is in Off-Road, Terrain or Tow/Haul modes, or if you have a trailer attached.
For your security, please don't include personal info such as phone number, address or credit card details.
Q&As
LOOKING FOR SOMETHING ELSE?
NEED MORE HELP?
Communicate with one of our specialists.
To find out if your vehicle has this feature, contact your dealer or refer to your vehicle’s equipment list. Please check your Owner's Manual for more information about features.
